Currency Counter with Counterfeit Detection: How to Choose the Right Machine for Your Bank or Retail Chain
What counterfeit detection methods does a currency counter actually use?
Most modern currency counters combine three core verification methods: ultraviolet (UV) scanning to identify UV-reactive security threads and fibers, magnetic (MG) sensors to read iron-based inks and serial numbers, and infrared (IR) scanning to verify patterns that are only visible under IR light. On entry-level machines, this trio is often enough for single-currency counting. For U.S. dollar, Euro, UAE dirham, Saudi riyal, Nigerian naira, Mexican peso, or Brazilian real handling, you want a model that checks all three parameters simultaneously rather than one at a time. FEELTECK positions the FT-501 and FT-503 high-speed counters for this exact use case, with UV, MG, and IR sensors running at up to 2,000 notes per minute.
Why do banks still get stuck with basic bill counters that miss counterfeits?
The main reason is buying on price alone. A basic bill counter may only include UV, which catches obvious forgeries but misses color-shifting inks, thin-paper reproductions, or washed genuine notes. Banks and large retail chains are increasingly targeted with mixed stacks of genuine and counterfeit notes, so a single-sensor machine is no longer sufficient. In our experience supplying 160+ countries, the buyers who upgrade to mixed-denomination counters with multi-spectral imaging see fewer chargebacks and tighter cash-room control. For example, the FEELTECK FT-500G at FOB from $280.00 runs 800 to 1,200 pcs/min and reads mixed denominations, serial numbers, and counterfeits in one pass. This matters in Kenya, Nigeria, Mexico, and the UAE where USD and euro cash is common.
What is the difference between UV, MG, IR, and CIS detection?
UV checks invisible security features. MG checks magnetic ink used on government-issued banknotes. IR compares how the note reacts to infrared light against a stored template. CIS, or contact image sensor, is a full-color scan and is far stronger — it sees the whole note surface, not just a few points. A mixed-denomination counter with CIS reads the bill image, matches it to a currency database, verifies security features, and reports the total value. FEELTECK uses CIS on the FT-500G, FT-500S, FT-610, FT-620, FT-700, and FT-700S series. These are the models you want when counter staff handle multiple currencies daily. For simple single-currency cash intake, an IR+MG+UV model like the FT-501 is sufficient.
How do I choose the right counterfeit-detection counter for a retail chain?
- Currency mix: Single currency only? Choose FT-501 or FT-503. Multi-currency? Choose FT-500G or FT-700.
- Counting speed: Retail cash pickup points typically need 800–1,000 notes/min. Bank branches may need 1,200 notes/min.
- Verification depth: Basic UV-only machines are for low-risk, low-volume environments. For retail chains in Mexico City, São Paulo, Lagos, or Nairobi, choose UV+MG+IR or CIS.
- Connectivity: Need USB export or value reports? The FT-610 and FT-620 offer screen-based reports and serial number capture.
- MOQ and budget: FEELTECK MOQs are as low as 10 units for some models, with FOB from $17.50 to $300.00 depending on the detection technology.
Which FEELTECK models give the best counterfeit detection for the money?
The best value for a bank branch is the FT-500G mixed denomination money counter at FOB from $280.00. It handles mixed bills in one hopper, detects counterfeits with CIS, and reports total value. For a retail chain with multiple cash counters, the FT-700 at FOB from $280.00 is comparable. If you need two-pocket sorting (suspect notes separated automatically), the FT-800 at FOB from $510.00 is the entry point. For cash-in-transit teams or small offices that only need a fast first pass, the FT-501 at FOB from $130.00 is a solid UV+MG+IR workhorse. The FT-D300 portable cash detector at FOB from $28.00 is ideal for tellers or street-level verification.
What should an importer check before ordering from a China factory?
Three things: firmware currency packs, voltage compatibility, and spare sensor availability. Ask if the machine ships with an active currency pack for your target notes. For Saudi Arabia, Dubai, Nigeria, Kenya, South Africa, Mexico, and Brazil, FEELTECK pre-loads the relevant single-currency or multi-currency pack before shipment. Voltage is also critical — we ship 110V, 127V, 220V, and 240V units based on destination. Finally, ask for spare UV tubes and CIS modules. Counterfeit detection sensors are consumable parts. FEELTECK keeps spare parts stock in Wenzhou Pingyang and ships with your order. Our MOQs from 50 units for value counters and 100 units for binding machines keep inventory accessible without overcommitting.
Why buy FOB direct from FEELTECK instead of a local distributor?
Local distributors add 35–80% margin and often rebrand entry-level machines. Buying FOB from FEELTECK means you pay the same public wholesale price listed on our product pages and know the model ID, sensor set, and speed rating without middleman markup. A FT-3188 bill counter at FOB from $35.00 in a 50-unit order is enough to run a small branch network, while a FT-500G at FOB from $280.00 replaces machines distributors typically sell for $500+. We export from Wenzhou Pingyang to 160+ countries and provide English-language firmware, manuals, and WhatsApp support before and after delivery.
| Model | Best For | Speed | FOB Price (from) |
|---|---|---|---|
| FT-D300 | Teller-level portable counterfeit spot checks | <0.5 sec/sheet | from $28.00 |
| FT-501 | Single-currency banknote counting with UV/MG/IR | 800–2,000 notes/min | from $130.00 |
| FT-500G | Mixed denomination counting with CIS counterfeit detection | 800–1,200 pcs/min | from $280.00 |
| FT-700 | Multi-currency value counting for bank branches | 800–1,200 pcs/min | from $280.00 |
| FT-800 | Two-pocket sorting for suspect note separation | 800–1,200 pcs/min | from $510.00 |
| FT-7100 | Entry-level single-currency bill counting | >1,000 pcs/min | from $45.00 |
Frequently Asked Questions
What is the minimum order quantity for a currency counter with counterfeit detection?
Most FEELTECK bill counters and mixed-denomination counters have an MOQ of 50 units. The FT-501 and FT-503 high-speed counters are MOQ 50. The FT-D300 portable cash detector is MOQ 200 because it is a low-cost accessory item. If you need fewer than 50 units for a pilot, contact our team and we can discuss a trial order.
Can you pre-load currency packs for UAE dirhams, Saudi riyals, Nigerian naira, or Mexican pesos?
Yes. The FEELTECK FT-500G, FT-610, FT-620, FT-700, and FT-700S support multiple currency packs. We configure your target currencies before shipping, so the machine works out of the box. If a new banknote series is released, firmware updates are sent by email or WhatsApp.
What voltage do these machines use for Africa, the Middle East, and Latin America?
We ship 110V, 127V, 220V, and 240V configurations. For Nigeria, Kenya, and South Africa we typically ship 220–240V. For UAE and Saudi Arabia, 220–230V. For Mexico and parts of Brazil, 127V. You must confirm your local voltage when ordering so we match the power supply on the FT-501, FT-700, or other counters.
How long does shipping take from the FEELTECK factory in China?
Production time for standard models like the FT-3188 or FT-500S is 7–15 days after payment. Sea freight to Jebel Ali, Lagos, Mombasa, Durban, Veracruz, or Santos typically takes 20–40 days depending on the route. Air freight is available for urgent orders. We handle export documentation and provide a CIF or FOB quotation based on your port.
Explore FEELTECK Products
- Bill counters with UV/MG/IR detection
- Mixed denomination counterfeit-detection counters
- How UV, MG, IR, and CIS detection work
- How to choose a bill counter for your cash volume
- Importing currency counters from China: steps and costs
- Request a quotation from FEELTECK
Get a Factory-Direct Quote
Message FEELTECK on WhatsApp at +86 18157139239 for a FOB quotation on currency counters with counterfeit detection, or use the contact form on our website to request model-specific pricing and shipping for your port.
Send an Inquiry